Waterproofing Membranes


Monolithic Waterproofing Membranes from Hydrotech

Monolithic Membrane 6125® (MM6125®) is a thick, tough, flexible, self-healing membrane for use in waterproofing. MM6125® is a special formulation of refined asphalts and synthetic rubbers. MM6125® has been successfully used worldwide by leading architects, engineers and owners on all types of horizontal and vertical structures including plazas, parking decks, planters, tunnels, bridges, mud slabs, foundation walls and roof areas, establishing an unbeatable track record of 50 years.
  • MM6125® is a thermoplastic material - one component, 100% solids, no solvent means no on-site cure failures, no two part mixing and no VOC restrictions.
  • MM6125® conforms to all surface irregularities and bonds tenaciously to an acceptable substrate (i.e., concrete, steel, wood, etc.) eliminating lateral migration of water.
  • MM6125® is completely monolithic; no seam.
  • MM6125® is typically installed at 6 mm thick in the Fabric Reinforced Assembly. This is more than three times thicker than most other waterproofing membranes. Thickness is an important benefit in that
  • MM6125® exhibits the ability to self-heal and better accommodate developing cracks in a concrete substrate. MM6125® can be installed at temperatures as low as -18°C (provided the substrate is clean, dry and free of snow and frost).
  • MM6125® detailing is simplified, with triple protection at all critical locations.
  • MM6125® is ideal for dead level installations; no slope required just positive drainage. MM6125® was developed to perform in a wet (submerged) environment.
  • MM6125® tie-ins from one day's work to the next are easy, perfect for phased construction.

MM6125® Approvals/Certifications:

  • CAN/CGSB 37.50-M89 (Canadian General Standards Board)
  • Applicable ASTM Test Methods (American Society for Testing and Materials).

Learn More